FAG 53324-MP+U324 Thrust ball bearings
Also known as : 53324-MP+U324
- Inside Diameter: 120 mm
- Outside Diameter: 220 mm
- Width: 80 mm
- Basic dynamic load rating: 325 kN
- Basic static load rating: 910 kN
FAG 53324-MP+U324
FAG 53324-MP+U324 details
| Number | 53324-MP+U324 | |
|---|---|---|
| Type |
Axial deep groove ball bearings main dimensions to DIN 711/ISO 104, single direction, with spherical housing locating washer and seating washer, separable |
|
| d | 120mm | |
| D3 | 220mm | |
| T1 | 80mm | |
| A | 63mm | |
| C | 22mm | |
| D | 210mm | |
| D1 | 123mm | |
| D2 | 165mm | |
| Da max | 165mm | |
| d1 | 205mm | |
| da min | 174mm | |
| R | 160mm | |
| ra max | 2,1mm | |
| rmin | 2,1mm | |
| T | 74,1mm | |
| U324 | Designation, seating washer | |
| m | 10,6kg | Mass |
| m1 | 2,01kg | Mass, seating washer |
| Ca | 325000N | Basic dynamic load rating, axial |
| C0a | 910000N | Basic static load rating, axial |
| Cua | 32500N | Fatigue limit load, axial |
| nG | 16101/min | Limiting speed |
| nϑr | 32001/min | Reference speed |
| A | 4,4 | Minimum load factor |
FAG 53324-MP+U324 bearing cross reference
D17-A1
120 mmx 220 mmx80 mm
53413
120 mmx 220 mmx80 mm
53311
120 mmx 220 mmx80 mm
53326XU
120 mmx 220 mmx80 mm
53226XU
120 mmx 220 mmx80 mm
53424XU
120 mmx 220 mmx80 mm
53324XU
120 mmx 220 mmx80 mm
53224U
120 mmx 220 mmx80 mm
53422XU
120 mmx 220 mmx80 mm
53322XU
120 mmx 220 mmx80 mm
53222U
120 mmx 220 mmx80 mm
