INA GIR50-UK-2RS Rod end joint
Also known as : GIR50-UK-2RS
- Inside Diameter: 50 mm
- Outside Diameter: 112 mm
- Width: 216 mm
- Basic dynamic load rating: 442 kN
- Basic static load rating: 313 kN
INA GIR50-UK-2RS
INA GIR50-UK-2RS details
| Number | GIR50-UK-2RS | |
|---|---|---|
| Type | Rod ends with internal thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand thread | |
| d | 50 mm | Tolerance: 0/-0,012 |
| d2 | 112 mm | |
| l4 | 216 mm | |
| B | 35 mm | Tolerance: 0/-0,12 |
| C1 | 30 mm | |
| D | 75 mm | |
| d1 | 55,9 mm | |
| d3 | M45x3 | |
| d4 | 62 mm | |
| d5 | 75 mm | |
| dK | 66 mm | |
| h1 | 160 mm | |
| l3 | 68 mm | |
| l5 | 20 mm | |
| l7 | 60 mm | |
| r1s min | 0,6 mm | Chamfer dimension |
| W | 65 mm | |
| α | 6 ° | |
| m | 3,5 kg | Mass |
| Cr | 442000 N | Basic dynamic load rating, radial |
| C0r | 313000 N | Basic static load rating, radial Basic load rating of housing In rod ends with the sliding material ELGOGLIDE, the basic static load rating C 0r of the housing is less than the basic dynamic load rating C r of the bearing. |
INA GIR50-UK-2RS bearing cross reference
GAL40-UK-2RS
50 mmx 112 mmx216 mm
GAR70-DO-2RS
50 mmx 112 mmx216 mm
GAR40-DO-2RS
50 mmx 112 mmx216 mm
GAL45-DO-2RS
50 mmx 112 mmx216 mm
GAL35-DO-2RS
50 mmx 112 mmx216 mm
GAR17-UK
50 mmx 112 mmx216 mm
GAR12-UK
50 mmx 112 mmx216 mm
GAR6-UK
50 mmx 112 mmx216 mm
GAL30-UK
50 mmx 112 mmx216 mm
GAL12-UK
50 mmx 112 mmx216 mm
GAL6-UK
50 mmx 112 mmx216 mm
