FAG 1322-M Aligning ball bearing
Also known as : 1322-M
- Inside Diameter: 110 mm
- Outside Diameter: 240 mm
- Width: 50 mm
- Basic dynamic load rating: 165 kN
- Basic static load rating: 71 kN
FAG 1322-M
FAG 1322-M details
| d | 110 mm | |
|---|---|---|
| D | 240 mm | |
| B | 50 mm | |
| C1 | 2,7 mm | The ball projection must be taken into consideration when designing the adjacent construction. |
| D1 | 202,5 mm | |
| Da max | 226 mm | |
| d1 | 154,5 mm | |
| da min | 124 mm | |
| ra max | 2,5 mm | |
| rmin | 3 mm | |
| m | 12,3 kg | Mass |
| Cr | 165000 N | Basic dynamic load rating, radial |
| C0r | 71000 N | Basic static load rating, radial |
| e | 0,23 | |
| Y1 | 2,79 | |
| Y2 | 4,32 | |
| Y0 | 2,92 | |
| nG | 4200 1/min | Limiting speed |
| nB | 3400 1/min | Reference speed |
| Cur | 3300 N | Fatigue limit load, radial |
FAG 1322-M bearing cross reference
11212-TVH
110 mmx 240 mmx 50 mm
11211-TVH
110 mmx 240 mmx 50 mm
11210-TVH
110 mmx 240 mmx 50 mm
11209-TVH
110 mmx 240 mmx 50 mm
11207-TVH
110 mmx 240 mmx 50 mm
11206-TVH
110 mmx 240 mmx 50 mm
11205-TVH
110 mmx 240 mmx 50 mm
11204-TVH
110 mmx 240 mmx 50 mm
2311-2RS-TVH
110 mmx 240 mmx 50 mm
2310-2RS-TVH
110 mmx 240 mmx 50 mm
2309-2RS-TVH
110 mmx 240 mmx 50 mm
