FAG HSS7003-E-T-P4S Angular contact ball bearings
Also known as : HSS7003-E-T-P4S
- Inside Diameter: 17 mm
- Outside Diameter: 35 mm
- Width: 10 mm
- Basic dynamic load rating: 3.35 kN
- Basic static load rating: 1.52 kN
FAG HSS7003-E-T-P4S
FAG HSS7003-E-T-P4S details
| Number | HSS7003-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances | |
| d | 17 mm | |
| D | 35 mm | |
| B | 10 mm | |
| a | 11,1 mm | |
| Da | 32 mm | Tolerance: H12 |
| da | 21 mm | Tolerance: h12 |
| r1 min | 0,3 mm | |
| ra max | 0,3 mm | |
| ra1 max | 0,1 mm | |
| rmin | 0,3 mm | |
| α | 25 ° | Contact angle |
| m | 0,045 kg | ≈ Mass |
| Cr | 3350 N | Basic dynamic load rating, radial |
| C0r | 1520 N | Basic static load rating, radial |
| Cur | 157 N | Fatigue limit load, radial |
| nG Fett | 56000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 21 N | Preload force |
| FV M | 63 N | Preload force |
| FV H | 126 N | Preload force |
| KaE L | 61 N | Lift-off force |
| KaE M | 187 N | Lift-off force |
| KaE H | 382 N | Lift-off force |
| ca L | 35,7 N/µm | Axial rigidity |
| ca M | 53,4 N/µm | Axial rigidity |
| ca H | 70 N/µm | Axial rigidity |
FAG HSS7003-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
17 mmx 35 mmx 10 mm
3806-B-2RS-TVH
17 mmx 35 mmx 10 mm
3801-B-2RS-TVH
17 mmx 35 mmx 10 mm
3217-B-2RS-TVH
17 mmx 35 mmx 10 mm
3313-BD-XL
17 mmx 35 mmx 10 mm
3311-BD-XL
17 mmx 35 mmx 10 mm
3310-BD-XL-TVH
17 mmx 35 mmx 10 mm
3310-BD-XL
17 mmx 35 mmx 10 mm
3309-BD-XL
17 mmx 35 mmx 10 mm
3307-BD-XL
17 mmx 35 mmx 10 mm
3306-BD-XL
17 mmx 35 mmx 10 mm
