FAG HS7007-C-T-P4S Angular contact ball bearings
Also known as : HS7007-C-T-P4S
- Inside Diameter: 35 mm
- Outside Diameter: 62 mm
- Width: 14 mm
- Basic dynamic load rating: 8.9 kN
- Basic static load rating: 5 kN
FAG HS7007-C-T-P4S
FAG HS7007-C-T-P4S details
| Number | HS7007-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances | |
| d | 35 mm | |
| D | 62 mm | |
| B | 14 mm | |
| a | 13,5 mm | |
| Da | 56 mm | Tolerance: H12 |
| da | 41 mm | Tolerance: h12 |
| Etk max | 46,8 mm | |
| Etk min | 45,7 mm | |
| Etk1 max | 46,8 mm | |
| Etk1 min | 43,9 mm | |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 0,3 mm | |
| rmin | 1 mm | |
| α | 15 ° | Contact angle |
| m | 0,169 kg | ≈ Mass |
| Cr | 8900 N | Basic dynamic load rating, radial |
| C0r | 5000 N | Basic static load rating, radial |
| Cur | 510 N | Fatigue limit load, radial |
| nG Fett | 34000 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 50000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 31 N | Preload force |
| FV M | 93 N | Preload force |
| FV H | 187 N | Preload force |
| KaE L | 94 N | Lift-off force |
| KaE M | 295 N | Lift-off force |
| KaE H | 614 N | Lift-off force |
| ca L | 27,1 N/µm | Axial rigidity |
| ca M | 42,8 N/µm | Axial rigidity |
| ca H | 58,8 N/µm | Axial rigidity |
FAG HS7007-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
35 mmx 62 mmx 14 mm
3806-B-2RS-TVH
35 mmx 62 mmx 14 mm
3801-B-2RS-TVH
35 mmx 62 mmx 14 mm
3217-B-2RS-TVH
35 mmx 62 mmx 14 mm
3313-BD-XL
35 mmx 62 mmx 14 mm
3311-BD-XL
35 mmx 62 mmx 14 mm
3310-BD-XL-TVH
35 mmx 62 mmx 14 mm
3310-BD-XL
35 mmx 62 mmx 14 mm
3309-BD-XL
35 mmx 62 mmx 14 mm
3307-BD-XL
35 mmx 62 mmx 14 mm
3306-BD-XL
35 mmx 62 mmx 14 mm
