FAG HSS71924-E-T-P4S Angular contact ball bearings
Also known as : HSS71924-E-T-P4S
- Inside Diameter: 120 mm
- Outside Diameter: 165 mm
- Width: 22 mm
- Basic dynamic load rating: 33.5 kN
- Basic static load rating: 30 kN
FAG HSS71924-E-T-P4S
FAG HSS71924-E-T-P4S details
| Number | HSS71924-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 120 mm | |
| D | 165 mm | |
| B | 22 mm | |
| a | 44,2 mm | |
| Da | 157 mm | Tolerance: H12 |
| da | 128 mm | Tolerance: h12 |
| r1 min | 1,1 mm | |
| ra max | 0,6 mm | |
| ra1 max | 0,6 mm | |
| rmin | 1,1 mm | |
| α | 25 ° | Contact angle |
| m | 1,39 kg | ≈ Mass |
| Cr | 33500 N | Basic dynamic load rating, radial |
| C0r | 30000 N | Basic static load rating, radial |
| Cur | 2600 N | Fatigue limit load, radial |
| nG Fett | 10000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 196 N | Preload force |
| FV M | 587 N | Preload force |
| FV H | 1173 N | Preload force |
| KaE L | 562 N | Lift-off force |
| KaE M | 1716 N | Lift-off force |
| KaE H | 3492 N | Lift-off force |
| ca L | 193 N/µm | Axial rigidity |
| ca M | 286 N/µm | Axial rigidity |
| ca H | 371 N/µm | Axial rigidity |
FAG HSS71924-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
120 mmx 165 mmx 22 mm
3806-B-2RS-TVH
120 mmx 165 mmx 22 mm
3801-B-2RS-TVH
120 mmx 165 mmx 22 mm
3217-B-2RS-TVH
120 mmx 165 mmx 22 mm
3313-BD-XL
120 mmx 165 mmx 22 mm
3311-BD-XL
120 mmx 165 mmx 22 mm
3310-BD-XL-TVH
120 mmx 165 mmx 22 mm
3310-BD-XL
120 mmx 165 mmx 22 mm
3309-BD-XL
120 mmx 165 mmx 22 mm
3307-BD-XL
120 mmx 165 mmx 22 mm
3306-BD-XL
120 mmx 165 mmx 22 mm
