FAG HSS71911-E-T-P4S Angular contact ball bearings
Also known as : HSS71911-E-T-P4S
- Inside Diameter: 55 mm
- Outside Diameter: 80 mm
- Width: 13 mm
- Basic dynamic load rating: 12.3 kN
- Basic static load rating: 8 kN
FAG HSS71911-E-T-P4S
FAG HSS71911-E-T-P4S details
| Number | HSS71911-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 55 mm | |
| D | 80 mm | |
| B | 13 mm | |
| a | 22,2 mm | |
| Da | 75,5 mm | Tolerance: H12 |
| da | 60 mm | Tolerance: h12 |
| r1 min | 1 mm | |
| ra max | 0,6 mm | |
| ra1 max | 0,3 mm | |
| rmin | 1 mm | |
| α | 25 ° | Contact angle |
| m | 0,218 kg | ≈ Mass |
| Cr | 12300 N | Basic dynamic load rating, radial |
| C0r | 8000 N | Basic static load rating, radial |
| Cur | 830 N | Fatigue limit load, radial |
| nG Fett | 22000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 73 N | Preload force |
| FV M | 219 N | Preload force |
| FV H | 438 N | Preload force |
| KaE L | 211 N | Lift-off force |
| KaE M | 645 N | Lift-off force |
| KaE H | 1317 N | Lift-off force |
| ca L | 93,2 N/µm | Axial rigidity |
| ca M | 139 N/µm | Axial rigidity |
| ca H | 181 N/µm | Axial rigidity |
FAG HSS71911-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
55 mmx 80 mmx 13 mm
3806-B-2RS-TVH
55 mmx 80 mmx 13 mm
3801-B-2RS-TVH
55 mmx 80 mmx 13 mm
3217-B-2RS-TVH
55 mmx 80 mmx 13 mm
3313-BD-XL
55 mmx 80 mmx 13 mm
3311-BD-XL
55 mmx 80 mmx 13 mm
3310-BD-XL-TVH
55 mmx 80 mmx 13 mm
3310-BD-XL
55 mmx 80 mmx 13 mm
3309-BD-XL
55 mmx 80 mmx 13 mm
3307-BD-XL
55 mmx 80 mmx 13 mm
3306-BD-XL
55 mmx 80 mmx 13 mm
