FAG HSS71906-E-T-P4S Angular contact ball bearings
Also known as : HSS71906-E-T-P4S
- Inside Diameter: 30 mm
- Outside Diameter: 47 mm
- Width: 9 mm
- Basic dynamic load rating: 5.6 kN
- Basic static load rating: 2.95 kN
FAG HSS71906-E-T-P4S
FAG HSS71906-E-T-P4S details
| Number | HSS71906-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 30 mm | |
| D | 47 mm | |
| B | 9 mm | |
| a | 13,5 mm | |
| Da | 43,5 mm | Tolerance: H12 |
| da | 34 mm | Tolerance: h12 |
| r1 min | 0,3 mm | |
| ra max | 0,3 mm | |
| ra1 max | 0,15 mm | |
| rmin | 0,3 mm | |
| α | 25 ° | Contact angle |
| m | 0,058 kg | ≈ Mass |
| Cr | 5600 N | Basic dynamic load rating, radial |
| C0r | 2950 N | Basic static load rating, radial |
| Cur | 305 N | Fatigue limit load, radial |
| nG Fett | 38000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 35 N | Preload force |
| FV M | 104 N | Preload force |
| FV H | 207 N | Preload force |
| KaE L | 100 N | Lift-off force |
| KaE M | 306 N | Lift-off force |
| KaE H | 625 N | Lift-off force |
| ca L | 52,9 N/µm | Axial rigidity |
| ca M | 79,1 N/µm | Axial rigidity |
| ca H | 103 N/µm | Axial rigidity |
FAG HSS71906-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
30 mmx 47 mmx 9 mm
3806-B-2RS-TVH
30 mmx 47 mmx 9 mm
3801-B-2RS-TVH
30 mmx 47 mmx 9 mm
3217-B-2RS-TVH
30 mmx 47 mmx 9 mm
3313-BD-XL
30 mmx 47 mmx 9 mm
3311-BD-XL
30 mmx 47 mmx 9 mm
3310-BD-XL-TVH
30 mmx 47 mmx 9 mm
3310-BD-XL
30 mmx 47 mmx 9 mm
3309-BD-XL
30 mmx 47 mmx 9 mm
3307-BD-XL
30 mmx 47 mmx 9 mm
3306-BD-XL
30 mmx 47 mmx 9 mm
