FAG HSS71906-C-T-P4S Angular contact ball bearings
Also known as : HSS71906-C-T-P4S
- Inside Diameter: 30 mm
- Outside Diameter: 47 mm
- Width: 9 mm
- Basic dynamic load rating: 5.9 kN
- Basic static load rating: 3.1 kN
FAG HSS71906-C-T-P4S
FAG HSS71906-C-T-P4S details
| Number | HSS71906-C-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 30 mm | |
| D | 47 mm | |
| B | 9 mm | |
| a | 9,7 mm | |
| Da | 43,5 mm | Tolerance: H12 |
| da | 34 mm | Tolerance: h12 |
| r1 min | 0,3 mm | |
| ra max | 0,3 mm | |
| ra1 max | 0,15 mm | |
| rmin | 0,3 mm | |
| α | 15 ° | Contact angle |
| m | 0,058 kg | ≈ Mass |
| Cr | 5900 N | Basic dynamic load rating, radial |
| C0r | 3100 N | Basic static load rating, radial |
| Cur | 320 N | Fatigue limit load, radial |
| nG Fett | 43000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 21 N | Preload force |
| FV M | 64 N | Preload force |
| FV H | 129 N | Preload force |
| KaE L | 65 N | Lift-off force |
| KaE M | 204 N | Lift-off force |
| KaE H | 425 N | Lift-off force |
| ca L | 21,3 N/µm | Axial rigidity |
| ca M | 33,8 N/µm | Axial rigidity |
| ca H | 46,5 N/µm | Axial rigidity |
FAG HSS71906-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
30 mmx 47 mmx 9 mm
3806-B-2RS-TVH
30 mmx 47 mmx 9 mm
3801-B-2RS-TVH
30 mmx 47 mmx 9 mm
3217-B-2RS-TVH
30 mmx 47 mmx 9 mm
3313-BD-XL
30 mmx 47 mmx 9 mm
3311-BD-XL
30 mmx 47 mmx 9 mm
3310-BD-XL-TVH
30 mmx 47 mmx 9 mm
3310-BD-XL
30 mmx 47 mmx 9 mm
3309-BD-XL
30 mmx 47 mmx 9 mm
3307-BD-XL
30 mmx 47 mmx 9 mm
3306-BD-XL
30 mmx 47 mmx 9 mm
