FAG HSS7022-C-T-P4S Angular contact ball bearings
Also known as : HSS7022-C-T-P4S
- Inside Diameter: 110 mm
- Outside Diameter: 170 mm
- Width: 28 mm
- Basic dynamic load rating: 48 kN
- Basic static load rating: 38 kN
FAG HSS7022-C-T-P4S
FAG HSS7022-C-T-P4S details
| Number | HSS7022-C-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 110 mm | |
| D | 170 mm | |
| B | 28 mm | |
| a | 32,8 mm | |
| Da | 159 mm | Tolerance: H12 |
| da | 121 mm | Tolerance: h12 |
| r1 min | 2 mm | |
| ra max | 2 mm | |
| ra1 max | 1 mm | |
| rmin | 2 mm | |
| α | 15 ° | Contact angle |
| m | 2,33 kg | ≈ Mass |
| Cr | 48000 N | Basic dynamic load rating, radial |
| C0r | 38000 N | Basic static load rating, radial |
| Cur | 3300 N | Fatigue limit load, radial |
| nG Fett | 12000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 168 N | Preload force |
| FV M | 503 N | Preload force |
| FV H | 1005 N | Preload force |
| KaE L | 499 N | Lift-off force |
| KaE M | 1566 N | Lift-off force |
| KaE H | 3257 N | Lift-off force |
| ca L | 77,2 N/µm | Axial rigidity |
| ca M | 121 N/µm | Axial rigidity |
| ca H | 164 N/µm | Axial rigidity |
FAG HSS7022-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
110 mmx 170 mmx 28 mm
3806-B-2RS-TVH
110 mmx 170 mmx 28 mm
3801-B-2RS-TVH
110 mmx 170 mmx 28 mm
3217-B-2RS-TVH
110 mmx 170 mmx 28 mm
3313-BD-XL
110 mmx 170 mmx 28 mm
3311-BD-XL
110 mmx 170 mmx 28 mm
3310-BD-XL-TVH
110 mmx 170 mmx 28 mm
3310-BD-XL
110 mmx 170 mmx 28 mm
3309-BD-XL
110 mmx 170 mmx 28 mm
3307-BD-XL
110 mmx 170 mmx 28 mm
3306-BD-XL
110 mmx 170 mmx 28 mm
