FAG HSS7015-C-T-P4S Angular contact ball bearings
Also known as : HSS7015-C-T-P4S
- Inside Diameter: 75 mm
- Outside Diameter: 115 mm
- Width: 20 mm
- Basic dynamic load rating: 25.5 kN
- Basic static load rating: 17.9 kN
FAG HSS7015-C-T-P4S
FAG HSS7015-C-T-P4S details
| Number | HSS7015-C-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 75 mm | |
| D | 115 mm | |
| B | 20 mm | |
| a | 22,7 mm | |
| Da | 107 mm | Tolerance: H12 |
| da | 82 mm | Tolerance: h12 |
| r1 min | 1,1 mm | |
| ra max | 1 mm | |
| ra1 max | 0,6 mm | |
| rmin | 1,1 mm | |
| α | 15 ° | Contact angle |
| m | 0,742 kg | ≈ Mass |
| Cr | 25500 N | Basic dynamic load rating, radial |
| C0r | 17900 N | Basic static load rating, radial |
| Cur | 1850 N | Fatigue limit load, radial |
| nG Fett | 17000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 89 N | Preload force |
| FV M | 266 N | Preload force |
| FV H | 533 N | Preload force |
| KaE L | 265 N | Lift-off force |
| KaE M | 835 N | Lift-off force |
| KaE H | 1737 N | Lift-off force |
| ca L | 53,7 N/µm | Axial rigidity |
| ca M | 84,3 N/µm | Axial rigidity |
| ca H | 115 N/µm | Axial rigidity |
FAG HSS7015-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
75 mmx 115 mmx 20 mm
3806-B-2RS-TVH
75 mmx 115 mmx 20 mm
3801-B-2RS-TVH
75 mmx 115 mmx 20 mm
3217-B-2RS-TVH
75 mmx 115 mmx 20 mm
3313-BD-XL
75 mmx 115 mmx 20 mm
3311-BD-XL
75 mmx 115 mmx 20 mm
3310-BD-XL-TVH
75 mmx 115 mmx 20 mm
3310-BD-XL
75 mmx 115 mmx 20 mm
3309-BD-XL
75 mmx 115 mmx 20 mm
3307-BD-XL
75 mmx 115 mmx 20 mm
3306-BD-XL
75 mmx 115 mmx 20 mm
