FAG HSS7006-C-T-P4S Angular contact ball bearings
Also known as : HSS7006-C-T-P4S
- Inside Diameter: 30 mm
- Outside Diameter: 55 mm
- Width: 13 mm
- Basic dynamic load rating: 8.2 kN
- Basic static load rating: 4.25 kN
FAG HSS7006-C-T-P4S
FAG HSS7006-C-T-P4S details
| Number | HSS7006-C-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 30 mm | |
| D | 55 mm | |
| B | 13 mm | |
| a | 12,2 mm | |
| Da | 49 mm | Tolerance: H12 |
| da | 36 mm | Tolerance: h12 |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 0,3 mm | |
| rmin | 1 mm | |
| α | 15 ° | Contact angle |
| m | 0,138 kg | ≈ Mass |
| Cr | 8200 N | Basic dynamic load rating, radial |
| C0r | 4250 N | Basic static load rating, radial |
| Cur | 435 N | Fatigue limit load, radial |
| nG Fett | 38000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 29 N | Preload force |
| FV M | 88 N | Preload force |
| FV H | 177 N | Preload force |
| KaE L | 89 N | Lift-off force |
| KaE M | 280 N | Lift-off force |
| KaE H | 584 N | Lift-off force |
| ca L | 24,4 N/µm | Axial rigidity |
| ca M | 38,7 N/µm | Axial rigidity |
| ca H | 53,2 N/µm | Axial rigidity |
FAG HSS7006-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
30 mmx 55 mmx 13 mm
3806-B-2RS-TVH
30 mmx 55 mmx 13 mm
3801-B-2RS-TVH
30 mmx 55 mmx 13 mm
3217-B-2RS-TVH
30 mmx 55 mmx 13 mm
3313-BD-XL
30 mmx 55 mmx 13 mm
3311-BD-XL
30 mmx 55 mmx 13 mm
3310-BD-XL-TVH
30 mmx 55 mmx 13 mm
3310-BD-XL
30 mmx 55 mmx 13 mm
3309-BD-XL
30 mmx 55 mmx 13 mm
3307-BD-XL
30 mmx 55 mmx 13 mm
3306-BD-XL
30 mmx 55 mmx 13 mm
