FAG HSS7000-C-T-P4S Angular contact ball bearings
Also known as : HSS7000-C-T-P4S
- Inside Diameter: 10 mm
- Outside Diameter: 26 mm
- Width: 8 mm
- Basic dynamic load rating: 2.47 kN
- Basic static load rating: 0.94 kN
FAG HSS7000-C-T-P4S
FAG HSS7000-C-T-P4S details
| Number | HSS7000-C-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 10 mm | |
| D | 26 mm | |
| B | 8 mm | |
| a | 6,4 mm | |
| Da | 22 mm | Tolerance: H12 |
| da | 14 mm | Tolerance: h12 |
| r1 min | 0,3 mm | |
| ra max | 0,3 mm | |
| ra1 max | 0,1 mm | |
| rmin | 0,3 mm | |
| α | 15 ° | Contact angle |
| m | 0,023 kg | ≈ Mass |
| Cr | 2470 N | Basic dynamic load rating, radial |
| C0r | 940 N | Basic static load rating, radial |
| Cur | 97 N | Fatigue limit load, radial |
| nG Fett | 90000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 9 N | Preload force |
| FV M | 28 N | Preload force |
| FV H | 55 N | Preload force |
| KaE L | 28 N | Lift-off force |
| KaE M | 89 N | Lift-off force |
| KaE H | 185 N | Lift-off force |
| ca L | 10,9 N/µm | Axial rigidity |
| ca M | 17,4 N/µm | Axial rigidity |
| ca H | 24,1 N/µm | Axial rigidity |
FAG HSS7000-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
10 mmx 26 mmx 8 mm
3806-B-2RS-TVH
10 mmx 26 mmx 8 mm
3801-B-2RS-TVH
10 mmx 26 mmx 8 mm
3217-B-2RS-TVH
10 mmx 26 mmx 8 mm
3313-BD-XL
10 mmx 26 mmx 8 mm
3311-BD-XL
10 mmx 26 mmx 8 mm
3310-BD-XL-TVH
10 mmx 26 mmx 8 mm
3310-BD-XL
10 mmx 26 mmx 8 mm
3309-BD-XL
10 mmx 26 mmx 8 mm
3307-BD-XL
10 mmx 26 mmx 8 mm
3306-BD-XL
10 mmx 26 mmx 8 mm
