FAG HS7008-E-T-P4S Angular contact ball bearings
Also known as : HS7008-E-T-P4S
- Inside Diameter: 40 mm
- Outside Diameter: 68 mm
- Width: 15 mm
- Basic dynamic load rating: 8.9 kN
- Basic static load rating: 5.4 kN
FAG HS7008-E-T-P4S
FAG HS7008-E-T-P4S details
| Number | HS7008-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances |
|
| d | 40 mm | |
| D | 68 mm | |
| B | 15 mm | |
| a | 20,1 mm | |
| Da | 62 mm | Tolerance: H12 |
| da | 46 mm | Tolerance: h12 |
| Etk max | 52,3 mm | |
| Etk min | 51,2 mm | |
| Etk1 max | 52,3 mm | |
| Etk1 min | 49,4 mm | |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 0,3 mm | |
| rmin | 1 mm | |
| α | 25 ° | Contact angle |
| m | 0,211 kg | ≈ Mass |
| Cr | 8900 N | Basic dynamic load rating, radial |
| C0r | 5400 N | Basic static load rating, radial |
| Cur | 560 N | Fatigue limit load, radial |
| nG Fett | 26000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 40000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 53 N | Preload force |
| FV M | 160 N | Preload force |
| FV H | 321 N | Preload force |
| KaE L | 154 N | Lift-off force |
| KaE M | 472 N | Lift-off force |
| KaE H | 964 N | Lift-off force |
| ca L | 74,7 N/µm | Axial rigidity |
| ca M | 111 N/µm | Axial rigidity |
| ca H | 145 N/µm | Axial rigidity |
FAG HS7008-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
40 mmx 68 mmx 15 mm
3806-B-2RS-TVH
40 mmx 68 mmx 15 mm
3801-B-2RS-TVH
40 mmx 68 mmx 15 mm
3217-B-2RS-TVH
40 mmx 68 mmx 15 mm
3313-BD-XL
40 mmx 68 mmx 15 mm
3311-BD-XL
40 mmx 68 mmx 15 mm
3310-BD-XL-TVH
40 mmx 68 mmx 15 mm
3310-BD-XL
40 mmx 68 mmx 15 mm
3309-BD-XL
40 mmx 68 mmx 15 mm
3307-BD-XL
40 mmx 68 mmx 15 mm
3306-BD-XL
40 mmx 68 mmx 15 mm
