FAG HS7002-C-T-P4S Angular contact ball bearings
Also known as : HS7002-C-T-P4S
- Inside Diameter: 15 mm
- Outside Diameter: 32 mm
- Width: 9 mm
- Basic dynamic load rating: 3.45 kN
- Basic static load rating: 1.48 kN
FAG HS7002-C-T-P4S
FAG HS7002-C-T-P4S details
| Number | HS7002-C-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances |
|
| d | 15 mm | |
| D | 32 mm | |
| B | 9 mm | |
| a | 7,6 mm | |
| Da | 29 mm | Tolerance: H12 |
| da | 19 mm | Tolerance: h12 |
| Etk max | 22,4 mm | |
| Etk min | 21,6 mm | |
| Etk1 max | 22,4 mm | |
| Etk1 min | 20,4 mm | |
| r1 min | 0,3 mm | |
| ra max | 0,3 mm | |
| ra1 max | 0,1 mm | |
| rmin | 0,3 mm | |
| α | 15 ° | Contact angle |
| m | 0,033 kg | ≈ Mass |
| Cr | 3450 N | Basic dynamic load rating, radial |
| C0r | 1480 N | Basic static load rating, radial |
| Cur | 152 N | Fatigue limit load, radial |
| nG Fett | 70000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 110000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 13 N | Preload force |
| FV M | 38 N | Preload force |
| FV H | 75 N | Preload force |
| KaE L | 38 N | Lift-off force |
| KaE M | 120 N | Lift-off force |
| KaE H | 251 N | Lift-off force |
| ca L | 13,7 N/µm | Axial rigidity |
| ca M | 21,8 N/µm | Axial rigidity |
| ca H | 30,2 N/µm | Axial rigidity |
FAG HS7002-C-T-P4S bearing cross reference
30/5-B-2Z-TVH
15 mmx 32 mmx 9 mm
3806-B-2RS-TVH
15 mmx 32 mmx 9 mm
3801-B-2RS-TVH
15 mmx 32 mmx 9 mm
3217-B-2RS-TVH
15 mmx 32 mmx 9 mm
3313-BD-XL
15 mmx 32 mmx 9 mm
3311-BD-XL
15 mmx 32 mmx 9 mm
3310-BD-XL-TVH
15 mmx 32 mmx 9 mm
3310-BD-XL
15 mmx 32 mmx 9 mm
3309-BD-XL
15 mmx 32 mmx 9 mm
3307-BD-XL
15 mmx 32 mmx 9 mm
3306-BD-XL
15 mmx 32 mmx 9 mm
