FAG HSS7000-E-T-P4S Angular contact ball bearings
Also known as : HSS7000-E-T-P4S
- Inside Diameter: 10 mm
- Outside Diameter: 26 mm
- Width: 8 mm
- Basic dynamic load rating: 2.35 kN
- Basic static load rating: 0.89 kN
FAG HSS7000-E-T-P4S
FAG HSS7000-E-T-P4S details
| Number | HSS7000-E-T-P4S | |
|---|---|---|
| Type |
FAG spindle bearings adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances |
|
| d | 10 mm | |
| D | 26 mm | |
| B | 8 mm | |
| a | 8,2 mm | |
| Da | 22 mm | Tolerance: H12 |
| da | 14 mm | Tolerance: h12 |
| r1 min | 0,3 mm | |
| ra max | 0,3 mm | |
| ra1 max | 0,1 mm | |
| rmin | 0,3 mm | |
| α | 25 ° | Contact angle |
| m | 0,023 kg | ≈ Mass |
| Cr | 2350 N | Basic dynamic load rating, radial |
| C0r | 890 N | Basic static load rating, radial |
| Cur | 92 N | Fatigue limit load, radial |
| nG Fett | 85000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 15 N | Preload force |
| FV M | 45 N | Preload force |
| FV H | 90 N | Preload force |
| KaE L | 43 N | Lift-off force |
| KaE M | 133 N | Lift-off force |
| KaE H | 273 N | Lift-off force |
| ca L | 26,8 N/µm | Axial rigidity |
| ca M | 40,3 N/µm | Axial rigidity |
| ca H | 53 N/µm | Axial rigidity |
FAG HSS7000-E-T-P4S bearing cross reference
30/5-B-2Z-TVH
10 mmx 26 mmx 8 mm
3806-B-2RS-TVH
10 mmx 26 mmx 8 mm
3801-B-2RS-TVH
10 mmx 26 mmx 8 mm
3217-B-2RS-TVH
10 mmx 26 mmx 8 mm
3313-BD-XL
10 mmx 26 mmx 8 mm
3311-BD-XL
10 mmx 26 mmx 8 mm
3310-BD-XL-TVH
10 mmx 26 mmx 8 mm
3310-BD-XL
10 mmx 26 mmx 8 mm
3309-BD-XL
10 mmx 26 mmx 8 mm
3307-BD-XL
10 mmx 26 mmx 8 mm
3306-BD-XL
10 mmx 26 mmx 8 mm
