FAG 222S.408 Self-aligning roller bearing
Also known as : 222S.408
- Inside Diameter: 114.3 mm
- Outside Diameter: 230 mm
- Width: 64 mm
- Basic dynamic load rating: 540 kN
- Basic static load rating: 720 kN
FAG 222S.408
FAG 222S.408 details
| Number | 222S.408 | |
|---|---|---|
| Type |
Split spherical roller bearings split spherical roller bearings, with inch size bearing bore |
|
| d | 114,3mm | |
| d | 4 1/2inch | |
| D | 230mm | |
| C | 64mm | |
| B | 104mm | |
| rmin | 3mm | |
| m | 15,1kg | Mass |
| Cr | 540000N | Basic dynamic load rating, radial |
| C0r | 720000N | Basic static load rating, radial |
| Cur | 55000N | Fatigue limit load, radial |
| nG | 12901/min | Limiting speed |
| e | 0,25 | |
| Y1 | 2,71 | |
| Y2 | 4,04 | |
| Y0 | 2,65 | |
| Fa max | 13800N | Permissible axial load, for inner ring without axial abutment |
| Mi | 35Nm | Tightening torque per clamping screw |
| Ma | 14Nm | Tightening torque per clamping screw |
| 22226K | Designation, spherical roller bearing, unsplit | |
| H3126X408 | Designation, adapter sleeve | |
| SNW26.408 | Designation, adapter sleeve, US design | |
| SNV230-F-L | Designation, plummer block housing | |
| SAF526/4.1/2 | Designation, plummer block housing, US design |
FAG 222S.408 bearing cross reference
24068EMD1
114.3 mmx 230 mmx 64 mm
232/560B
114.3 mmx 230 mmx 64 mm
241/560B
114.3 mmx 230 mmx 64 mm
231/560B
114.3 mmx 230 mmx 64 mm
23992
114.3 mmx 230 mmx 64 mm
23996
114.3 mmx 230 mmx 64 mm
240/560B
114.3 mmx 230 mmx 64 mm
232/530B
114.3 mmx 230 mmx 64 mm
23092B
114.3 mmx 230 mmx 64 mm
23096B
114.3 mmx 230 mmx 64 mm
230/560B
114.3 mmx 230 mmx 64 mm
