FAG 222S.300 Self-aligning roller bearing
Also known as : 222S.300
- Inside Diameter: 76.2 mm
- Outside Diameter: 150 mm
- Width: 36 mm
- Basic dynamic load rating: 184 kN
- Basic static load rating: 237 kN
FAG 222S.300
FAG 222S.300 details
| Number | 222S.300 | |
|---|---|---|
| Type |
Split spherical roller bearings split spherical roller bearings, with inch size bearing bore |
|
| d | 76,2mm | |
| d | 3inch | |
| D | 150mm | |
| C | 36mm | |
| B | 68mm | |
| rmin | 2mm | |
| m | 3,88kg | Mass |
| Cr | 184000N | Basic dynamic load rating, radial |
| C0r | 237000N | Basic static load rating, radial |
| Cur | 23100N | Fatigue limit load, radial |
| nG | 22801/min | Limiting speed |
| e | 0,22 | |
| Y1 | 3,1 | |
| Y2 | 4,62 | |
| Y0 | 3,03 | |
| Fa max | 7600N | Permissible axial load, for inner ring without axial abutment |
| Mi | 14Nm | Tightening torque per clamping screw |
| Ma | 8,5Nm | Tightening torque per clamping screw |
| 22217K | Designation, spherical roller bearing, unsplit | |
| H317X300 | Designation, adapter sleeve | |
| SNW17.300 | Designation, adapter sleeve, US design | |
| SNV150-F-L | Designation, plummer block housing | |
| SAF517/3 | Designation, plummer block housing, US design |
FAG 222S.300 bearing cross reference
24068EMD1
76.2 mmx 150 mmx 36 mm
232/560B
76.2 mmx 150 mmx 36 mm
241/560B
76.2 mmx 150 mmx 36 mm
231/560B
76.2 mmx 150 mmx 36 mm
23992
76.2 mmx 150 mmx 36 mm
23996
76.2 mmx 150 mmx 36 mm
240/560B
76.2 mmx 150 mmx 36 mm
232/530B
76.2 mmx 150 mmx 36 mm
23092B
76.2 mmx 150 mmx 36 mm
23096B
76.2 mmx 150 mmx 36 mm
230/560B
76.2 mmx 150 mmx 36 mm
